The MILTECH 402 is a rugged, military-grade Fast Ethernet switch with PoE and 5VDC power distribution available over the Ethernet ports. Combining LAN and power distribution and weighing less than 10 ounces, it drastically lightens the load and reduces cabling complexity in soldier carry applications.

Once connected to a military-grade 10-16.8VDC smart battery supply (4 cell Li-ION), it uses dynamic power allocation to provision 2 LAN channels with PoE (15.4 watt each), 2 LAN channels with 16.8 Vdc/5A (Vbat) and1 LAN channel with 5V/1.5A up to a maximum power budget of 35W. The MILTECH 402 is IEEE 802.3 compliant.

Networking features include full wire-speed forwarding rate (26.8 Mpps), store-and-forward, Auto MDX-II/MDI-X, auto negotiation, and address look-up.
The MILTECH 402 weighs less than 10 ounces including connectors and hardware and measures 3.93” x 3.7” x 1.34”. It meets MIL-STD 810F/G/GM, and MIL-STD 461 specifications.

Read More

By combining Ethernet, USB, serial,  SMBUS and open Linux architecture, the MILTECH 404 provides communication between multiple soldier-carry devices while managing and supplying power to the devices.

The MILTECH 404 comes equipped with 1X 10/100 fast Ethernet port, 3X USB 2.0 ports, 1X serial (RS232) port, and 1 external power source input. A powerful system on board (SOM) running Linux provides power management and is available for other tactical applications. All ports provide both Vbat and 5Vdc according to Nett Warrior pin out.

MIL-STD 810F and IP 68 rated, the MILTECH 404 measures just 4.6” x 4.85” x .98” and weighs just .66 lbs. It’s a compact, lightweight and adaptable solution ideally suited for the modern battlefield.

Read More

The MILTECH 914 is a cost-effective, ultra-compact Ethernet switch on board (ESOB) that is ideal for integrating in to system-level solutions for military and rugged applications. This 14 port (10/100/1000) managed switch includes advanced L2+ networking features such as include static routing, VLANS, traffic prioritization (QoS), bandwidth aggregation, and security at both port and board level.

At just 125mm (L) x 95(W) x 20(H), including connectors & hardware, the MILTECH 914 is the industry’s most dense Ethernet switch available. With a conformal coating, the MILTECH 914 stands up to extreme vibration and environmental elements while rated to work in temperatures from -45°C to +75°C. It complies to MILSTD-810F/G/GM when housed in an appropriate enclosure. With next-generation flat cable connectors that lock and screw down and 6-19VDC power, the MILTECH 914 easily mates with other board-level compute platforms and power systems.

Read More

The MILTECH 303 is a USB 3.1 compatible USB hub that has five (5) USB 3.1 ports, one (1) gigabit Ethernet port, and a dedicated IO port. What make this product really unique is that it not only provides connectivity between USB 3.0 devices (such as portable handhelds, sensors, storage, human interface devices, night vision goggles and GPS), but it also provides a robust power management and charging tool for these devices.

The MILTECH 303 is perfect for soldier-carry, fixed wing / rotor aircraft and rugged commercial applications. A wide voltage range of 12-28VDC and up to 2A of downstream power for each port, let’s if fit seamlessly in to a wide variety of platforms with varying power sources and still provide a consistent power to devices that require 5VDC via a USB interface. It supports the four most popular battery charging profiles: Dedicated Charging Port (DCP), Downstream Port (CDP), Standard Downstream Port (SDP) and custom profiles via SMBus or OT.

All of this technology in a rugged MIL-STD packaging that is smaller than a credit card and weighs less than 5 ounces!

Read More

The MILTECH 410 is a high-speed USB 3.0 hub with SMBus and advanced power management designed to be powered by soldier-carried battery packs. Small and powerful, the MILTECH 410 is ideal for integrating soldier-carried applications, such as advanced weapon and field communication systems (USB Thumb drives, tablets, radios, etc). The system can also be connected to an external power supply and charge the power source batteries as needed.

Understanding the increasing weight and growing amount of the equipment that a dismounted soldier needs to carry to effectively engage on the battlefield, Techaya focused its efforts to solve application consolidation and packaging miniaturization issues.

The MILTECH is a powerful HUB for managing both down and upstream data for field-deployed operations. Intelligent power management allows the device to prioritize energy supply to every device on the soldier-carry network and then “plug-in” to an external source when batteries need charging.

MIL-STD 810F and IP 68 rated, the MILTECH 410 measures just 4.6” x 3.58” x 1.06” and weighs just 310 Kg. It’s a compact, lightweight and adaptable solution ideally suited for the modern battlefield.

Read More

The rugged MILTECH 8P mounted inside ground combat vehicles, can charge up to 8 USB based electronic devices simultaneously while providing 5Vdc, 2A per port.

The MILTECH 8P is a Rugged USB Charger, enables to charge up to eight Smart Phones, PDA devices and other hand-held military and civil devices in APV’s, APC’s and other armored combat vehicles. Due to the increase in use of USB based electronic devices such as Smart Phones, Tablets, PDA’s in the modern battlefield, there is a constant need to charge these devices while transporting, in ground combat vehicles, to the battlefield. Thus, saving valuable battery charging capabilities to be used once the soldier dismounts from the vehicle.

Read More

The MILTECH 309 Fast Ethernet switch on board (ESoB) is a complete system-level board with eight 10/100Mbps ports. With board-to-board connectors, it serve as a robust solution for providing local area network (LAN) connectivity to IP-enabled computing and netcentric systems. Developed to be embedded in the smallest, harshest environments, the MILTECH 309 is less than 1.7” x 3” x .5” and features a wide temperature range and conformal coating.

With the best combination of size, weight, power and cost (SWaP-C) the MILTECH 309 operates on readily available 5VDC power and may easily be powered from computers and other devices with USB ports.

 

Read More

The MILTECH 919 is a MIL-STD, fully managed military grade board-level Gigabit switch, offering 8 triple-speed (10/100/1000Mbps) ports + 1 x 100/1000 fiber optic port. With built in board-to-board connectors, it is an ideal solution for adding advanced switching capabilities to any OEM embedded platform with space and weight limitations.

Advanced network features, never before found in a package of this size, include on-device IPv4 and IPv6 unicast routing between virtual LANS (VLANS), traffic prioritization (QoS), and bandwidth aggregation which can be remotely managed to optimize communications and prioritize critical information traffic such as voice and video.

The MILTECH 919 leads the industry with the smallest combination of size, weight, power and cost (SWaP-C) to save valuable real estate in mobile platforms where space and weight are at a premium. The conformal coating and ruggedized design makes the MILTECH 919 purpose-built to integrate in to sensor, compute and communications platforms that must withstand some of the harshest environments.

Read More

The MILTECH 304 is a 4 port rugged, ultra-compact military-grade Fast Ethernet switch. Its small size, IP67 military-grade rugged construction, make it the ideal Fast Ethernet switching solution for command post, man packable and UAV systems. Its four 10/100Mbps ports are plug-n-play with all Ethernet equipment and provide network connectivity for most portable Ethernet devices, including:

  • Helmet-mounted heads-up display
  • Computers
  • Navigation devices
  • Communications systems
  • IP based sensors

With the best combination of size, weight, power and cost (SWaP-C) in the industry, the MILTECH 304 ultra-compact military-grade,  4 port unmanaged Fast Ethernet switch reduces load on the soldier, providing more space for equipment that increases effectiveness and survivability. The MILTECH 304 operates on readily available 5VDC power and may easily be powered from computers and other devices with USB ports.

Read More

The MILTECH 308 is a small form factor military-grade, rugged 8 port unmanaged Fast Ethernet switch. It’s small size, IP67 military grade rugged construction, and Fast Ethernet make it the ideal switching solution for command post, man packable and UAV systems. Its eight 10/100Mbps ports are plug-n-play with all Ethernet equipment and provide network connectivity for most portable Ethernet devices, including:

  • Helmet-mounted heads-up display
  • Computer
  • Navigation devices
  • Communications systems
  • IP Based Sensors

With the best combination of size, weight, power and cost (SWaP-C) in the industry, the MILTECH 308 reduces load on the soldier, providing more space for equipment that increases effectiveness and survivability. The MILTECH 308 operates on readily available 5VDC power and may easily be powered from computers and other devices with USB ports.

Read More
1 2