Next generations avionics and flight control systems will depend on fiber optic networks to deliver real-time data for bandwidth intensive and delay sensitive applications such as for real-time voice, data and video applications. The MILTECH 24FO enables plug-and-play network switching for these next-generation fiber-based networks and devices. The MILTECH 24FO is the industry’s most compact fiber-optic enabled Ethernet switch offering a dense 24 ports in an approximate 8” x 4” x 2” footprint.

Advanced network features include switching protocols, virtual LANS (VLANS), traffic prioritization (QoS), and bandwidth aggregation. The MILTECH 24FO’s gigabit speeds and 28VDC power make it instantly compatible with any network device and power systems. Its mechanical packaging enhancements meet MIL-STD-810F airborne and ground environmental compliance and high reliability.
It is ideal for radar installations, EO sensor suites, persistent wide area surveillance, and signal intelligence applications.

Read More

The MILTECH 907 is a MIL-STD, fully managed military grade network switch designed for environments such as aerial pods, UAVs, small ground vehicles and robotics where space is extremely limited. It has 5 triple-speed(10/100/1000Mbps) ports delivered through a single top-mount, high density D-Type 44 pin connector.

Advanced network features include switching protocols, virtual LANS (VLANS), traffic prioritization (QoS), and bandwidth aggregation. It can be remotely managed to optimize communications and prioritize critical information traffic.

The unit has been especially hardened to improve ingress, impact, and shock/vibration protection and meets MIL-STD-461E and MIL-STD-810 810 F/GM , MIL-STD-1275/704 standards. Voltage input is 24Vdc and it consumes a maximum of 5W of power.

Read More

The MILTECH 914 is a cost-effective, ultra-compact Ethernet switch on board (ESOB) that is ideal for integrating in to system-level solutions for military and rugged applications. This 14 port (10/100/1000) managed switch includes advanced L2+ networking features such as include static routing, VLANS, traffic prioritization (QoS), bandwidth aggregation, and security at both port and board level.

At just 125mm (L) x 95(W) x 20(H), including connectors & hardware, the MILTECH 914 is the industry’s most dense Ethernet switch available. With a conformal coating, the MILTECH 914 stands up to extreme vibration and environmental elements while rated to work in temperatures from -45°C to +75°C. It complies to MILSTD-810F/G/GM when housed in an appropriate enclosure. With next-generation flat cable connectors that lock and screw down and 6-19VDC power, the MILTECH 914 easily mates with other board-level compute platforms and power systems.

Read More

The MILTECH 9022 is a MIL-STD Fully managed Military-grade network switch router with 12 triple speed (10/100/1000) ports. It is compatible with all the newest military industry network protocols for redundant link topology, security, multicast and management requirements including virtual LANS (VLANS), traffic prioritization/QoS, IPv4/IPv6 support, and bandwidth aggregation.

With a 1U footprint, the MILTECH 9022 supports 24VDC power with an optional redundant power supply for optimal system survivability. It meets MIL-STD-810F, MIL-STD-461E, MIL-STD-1275B airborne, ground mobile environmental, EMI/RFI compliance for high reliability.

Read More

The MILTECH 919 is a MIL-STD, fully managed military grade board-level Gigabit switch, offering 8 triple-speed (10/100/1000Mbps) ports + 1 x 100/1000 fiber optic port. With built in board-to-board connectors, it is an ideal solution for adding advanced switching capabilities to any OEM embedded platform with space and weight limitations.

Advanced network features, never before found in a package of this size, include on-device IPv4 and IPv6 unicast routing between virtual LANS (VLANS), traffic prioritization (QoS), and bandwidth aggregation which can be remotely managed to optimize communications and prioritize critical information traffic such as voice and video.

The MILTECH 919 leads the industry with the smallest combination of size, weight, power and cost (SWaP-C) to save valuable real estate in mobile platforms where space and weight are at a premium. The conformal coating and ruggedized design makes the MILTECH 919 purpose-built to integrate in to sensor, compute and communications platforms that must withstand some of the harshest environments.

Read More

Modern platforms contain dozens of network devices that must be interconnected including communications and navigation systems and IP-based sensors and video cameras and targeting systems. The MILTECH 904 is an small, rugged, military-grade, 4 port layer 2 managed gigabit Ethernet switch with 4 triple-speed (10/100/1000Mbps) ports. With the best combination of size, weight, power and cost (SWaP-C) in the industry, it saves valuable real estate on mobile platforms, such as unmanned aerial, ground and underwater vehicles. It can be remotely managed to optimize communications and prioritize critical information traffic.

Advanced network features, never before found in a package of this size, include on-device IPv4 and IPv6 unicast routing between virtual LANS (VLANS), traffic prioritization (QoS), and bandwidth aggregation. The MILTECH 904’s gigabit speeds and MIL-STD-1275 28VDC power bus make it instantly compatible with network device and power systems.

Read More

Modern platforms contain dozens of network devices that must be interconnected including communications and navigation systems and IP-based sensors and video cameras and targeting systems. The MILTECH 918 is an ideal solution for mobile Ethernet-equipped platforms such as unmanned and manned, airborne, ground and underwater vehicles. With the best combination of size, weight, and cost (SWaP-C) in the industry, it saves valuable real estate in mobile platforms with space and weight limitations.

The 918 is a MIL-STD, managed layer 2, military-grade, rugged network switch offering 8 triple-speed (10/100/1000Mbps) ports. It can be remotely managed to optimize communications and prioritize critical information traffic. Advanced network features, never before found in a package of this size, include on-device IPv4 and IPv6 unicast routing between virtual LANS (VLANS), traffic prioritization (QoS), and bandwidth aggregation. The MILTECH 918’s gigabit speeds and MIL-STD-1275 28VDC power bus make it instantly compatible with network device and power systems.

Read More

Modern platforms contain dozens of network devices that must be interconnected including communications and navigation systems and IP-based sensors and video cameras and targeting systems. The MILTECH 912 is an ideal solution for Ethernet-equipped platforms such as unmanned and manned airborne, ground and underwater vehicles. With the best combination of size, weight, and cost (SWaP-C) in the industry, it saves valuable real estate in mobile platforms with space and weight limitations.

The 912 is a MIL-STD, managed layer 2, military-grade, rugged network switch offering 12 triple-speed (10/100/1000Mbps) ports. It can be remotely managed to optimize communications and prioritize critical information traffic. Advanced network features include on-device IPv4 and IPv6 unicast routing between virtual LANS (VLANS), traffic prioritization (QoS), and bandwidth aggregation. The MILTECH 912’s gigabit speeds and MIL-STD-1275 28VDC power bus make it instantly compatible with network device and power systems.

Read More

The MILTECH™ 948 is a rugged, military gigabit Ethernet managed switch that supports both 8 triple speed (10/100/1000) ports and the option to support up to 2 fiber ports at either speed 100 or 1000. Its flexible configuration with both copper and fiber ports also lets the MILTECH 948 act as a physical media converter to bridge a change in physical media or extend a LAN connection. As a fully managed switch, it supports all the latest network protocols for redundant link topology, security, multicast and management requirements. It is a compact and flexible solution for managing both Ethernet and high-speed fiber connections to IP-networked devices.

Developed for military and harsh avionic applications, such as helicopters, the MILTECH™ 948 features mechanical packaging enhancements designed to withstand excessive vibration and temperature variation to meet MIL-STD-810G airborne and ground environmental compliance. Using nominal 24 VDC power the MILTECH 948 can be easily integrated in to most vehicle and avionic electronic systems.

Read More

The MILTECH 610-POE is the only military-grade PoE switch on the market today that supports 30W of PoE on all 8 Fast Ethernet 10/100, up to a maximum power budget of 330 watts total. It supports both 802.3af and 802.3at standard devices and supports COTS guidelines for PoE-enabled cameras, WiFi access points, mesh nodes and other devices.

Techaya’s MILTECH™ 610-PoE military-grade PoE+ simplifies cabling and reduces space requirements in mobile Ethernet-equipped platforms, such as vetronic, ground vehicles and aerial applications where traditional power sources have limited availability. Power over Ethernet (PoE) allows a single CAT 5 Ethernet cable connected to a data port to provide both data connection and electrical power to these networked devices.

Using sealed MIL-D-38999 circular connectors, it meets MIL-STD-810F airborne and ground environmental compliance for high physical and network reliability.

 

*Note: 910-POE and 610-POE have identical physical features and thus the picture is of a 910-POE.

Read More
1 2