The MILTECH 9116 Is a cost-effective, easy to manage 10 Gb Ethernet solution for mobile military platforms. The MILTECH 9116 is fully managed military grade network switch offering 12 x 10G copper ports and up to 4 x 10G fiber ports using TacBeam connectors. It can be remotely managed to optimize communications and prioritize critical information traffic.

Read More

The MILTECH 718 is a Gigabit Ethernet switch on board (GESoB) with 9 Gigabit Ethernet ports. With a single board-on-board connector, it can easily provide LAN connectivity to any UAV or robotic platform. Gigabit Ethernet speeds support higher data rate payloads such as cameras, sensors or control traffic.

Conformally coated, the MILTECH 718 meets MIL-STD-461F, MIL-STD-810F/G and IP68 requirements when housed in appropriate enclosures. Consuming only 5 watts of power with a range of 9-32 Vdc, the MILTECH 718 is a flexible solution for differing power profiles. The compact design gives it a footprint of  2.7” x 1.5” x 1.1” and a weight of 1.6 ounces.

Read More

Next generations avionics and flight control systems will depend on fiber optic networks to deliver real-time data for bandwidth intensive and delay sensitive applications such as for real-time voice, data and video applications. The MILTECH 24FO enables plug-and-play network switching for these next-generation fiber-based networks and devices. The MILTECH 24FO is the industry’s most compact fiber-optic enabled Ethernet switch offering a dense 24 ports in an approximate 8” x 4” x 2” footprint.

Advanced network features include switching protocols, virtual LANS (VLANS), traffic prioritization (QoS), and bandwidth aggregation. The MILTECH 24FO’s gigabit speeds and 28VDC power make it instantly compatible with any network device and power systems. Its mechanical packaging enhancements meet MIL-STD-810F airborne and ground environmental compliance and high reliability.
It is ideal for radar installations, EO sensor suites, persistent wide area surveillance, and signal intelligence applications.

Read More

The MILTECH 402 is a rugged, military-grade Fast Ethernet switch with PoE and 5VDC power distribution available over the Ethernet ports. Combining LAN and power distribution and weighing less than 10 ounces, it drastically lightens the load and reduces cabling complexity in soldier carry applications.

Once connected to a military-grade 10-16.8VDC smart battery supply (4 cell Li-ION), it uses dynamic power allocation to provision 2 LAN channels with PoE (15.4 watt each), 2 LAN channels with 16.8 Vdc/5A (Vbat) and1 LAN channel with 5V/1.5A up to a maximum power budget of 35W. The MILTECH 402 is IEEE 802.3 compliant.

Networking features include full wire-speed forwarding rate (26.8 Mpps), store-and-forward, Auto MDX-II/MDI-X, auto negotiation, and address look-up.
The MILTECH 402 weighs less than 10 ounces including connectors and hardware and measures 3.93” x 3.7” x 1.34”. It meets MIL-STD 810F/G/GM, and MIL-STD 461 specifications.

Read More

The MILTECH 907 is a MIL-STD, fully managed military grade network switch designed for environments such as aerial pods, UAVs, small ground vehicles and robotics where space is extremely limited. It has 5 triple-speed(10/100/1000Mbps) ports delivered through a single top-mount, high density D-Type 44 pin connector.

Advanced network features include switching protocols, virtual LANS (VLANS), traffic prioritization (QoS), and bandwidth aggregation. It can be remotely managed to optimize communications and prioritize critical information traffic.

The unit has been especially hardened to improve ingress, impact, and shock/vibration protection and meets MIL-STD-461E and MIL-STD-810 810 F/GM , MIL-STD-1275/704 standards. Voltage input is 24Vdc and it consumes a maximum of 5W of power.

Read More

The MILTECH 9136 is a fully managed Ethernet switch that is designed to manage complex network traffic in airborne and other military applications. It has the capability to interface with a total of 52 networked devices using a combination of 24 triple-speed (10/100/1000Mbps) ports+ 8 1G fiber ports (SGMII)+ 4 10G fiber ports (SFI) + 4 QSGMII ports that can be broken out for an addition 16 ports of 1G fiber.

The MT 9136 supports both Synchronous Ethernet (SyncE) and IEEE 1588 standards for time and frequency alignment across devices on military networks. Advanced L2/L3 network features include static routing, VLANS, traffic prioritization (QoS), bandwidth aggregation, and security at both port and board level.

Conformally coated and with board-to-board connectors, it can be easily integrated as a module-based network building block in to airborne and military applications. It is rated to withstand temperatures of 40°C to +85°C and meets MIL-STD 810 and 461 when housed in an appropriate enclosure.

Read More

The MILTECH 914 is a cost-effective, ultra-compact Ethernet switch on board (ESOB) that is ideal for integrating in to system-level solutions for military and rugged applications. This 14 port (10/100/1000) managed switch includes advanced L2+ networking features such as include static routing, VLANS, traffic prioritization (QoS), bandwidth aggregation, and security at both port and board level.

At just 125mm (L) x 95(W) x 20(H), including connectors & hardware, the MILTECH 914 is the industry’s most dense Ethernet switch available. With a conformal coating, the MILTECH 914 stands up to extreme vibration and environmental elements while rated to work in temperatures from -45°C to +75°C. It complies to MILSTD-810F/G/GM when housed in an appropriate enclosure. With next-generation flat cable connectors that lock and screw down and 6-19VDC power, the MILTECH 914 easily mates with other board-level compute platforms and power systems.

Read More

Military platforms now contain dozens of network devices including communications and navigation systems, IP-based sensors, video cameras and targeting systems that must be interconnected. Applications such as video and radar consume large amounts of bandwidth that must be managed on the platform and have guaranteed delivery off of the platform. The MILTECH 9124 simplifies this traffic management by combining both Layer 2 Ethernet switching functionality with Layer 3 dynamic routing on a board-level, ruggedized, plug-in module for embedded communications platforms.

The 9124 features 24 triple-speed (10/100/1000Mbps) ports with advanced network features such as virtual LANS (VLANS), traffic prioritization (QoS), bandwidth aggregation, dynamic routing (RIPV1,V2,OSPF V2/V3, Multicast Routing, VRRP, ECMP Routing) and full IPv6 support.

With the industry’s smallest footprint, the MILTECH 9124 measures only 2.55” by 3.55” to deliver significant SWAP-C advantage. With board-to-board connectors, it can easily be integrated as a module-based network building block in any military-grade communications platform. It is conformally coated and designed to withstand working temperatures of -40°C to +85°C and will comply with MIL-STD-810 and MIL-STD461when incorporated in a suitable enclosure. The MILTECH 9124 runs on power input of 3.3VDC with a maximum power consumption of 20 watts.

Read More

The MILTECH 9128 is designed to simplify the complex traffic management of advanced optics with ultra-high megapixel resolution on rugged manned and unmanned military and civilian sensitive mobile, tactical, airborne, and vehicle platforms for situational awareness and network-centric operations. By combining both Layer 2 Ethernet switching functionality and Layer 3 dynamic routing with four 10 GbE ports and 24 triple-speed (10/100/1000Mbps) ports it is ideal for aggregating traffic from dozens of IP-based devices to connect to processing computers.

Advanced network routing features include support for virtual LANS (VLANS), traffic prioritization (QoS), bandwidth aggregation, dynamic routing (RIPV1,V2, OSPF V2/V3, Multicast Routing, VRRP, ECMP Routing) and full IPv6.

With the industry’s smallest footprint, the MILTECH 9124 measures only 3.55″ by 3.55″ for significant SWAP-C advantage over traditional pre-packaged military-grade solutions. With board-to-board connectors, it can easily be integrated as a module-based network building block in any military-grade communications platform. It is conformally coated and designed to withstand working temperatures of -40°C to +85°C and will comply with MIL-STD-810 and MIL-STD461when incorporated in a suitable enclosure. The MILTECH 9124 runs on power input of 3.3VDC with a maximum power consumption of 20 watts.

Read More

The MILTECH 309 Fast Ethernet switch on board (ESoB) is a complete system-level board with eight 10/100Mbps ports. With board-to-board connectors, it serve as a robust solution for providing local area network (LAN) connectivity to IP-enabled computing and netcentric systems. Developed to be embedded in the smallest, harshest environments, the MILTECH 309 is less than 1.7” x 3” x .5” and features a wide temperature range and conformal coating.

With the best combination of size, weight, power and cost (SWaP-C) the MILTECH 309 operates on readily available 5VDC power and may easily be powered from computers and other devices with USB ports.

 

Read More
1 2 3