Next generations avionics and flight control systems will depend on fiber optic networks to deliver real-time data for bandwidth intensive and delay sensitive applications such as for real-time voice, data and video applications. The MILTECH 24FO enables plug-and-play network switching for these next-generation fiber-based networks and devices. The MILTECH 24FO is the industry’s most compact fiber-optic enabled Ethernet switch offering a dense 24 ports in an approximate 8” x 4” x 2” footprint.
Advanced network features include switching protocols, virtual LANS (VLANS), traffic prioritization (QoS), and bandwidth aggregation. The MILTECH 24FO’s gigabit speeds and 28VDC power make it instantly compatible with any network device and power systems. Its mechanical packaging enhancements meet MIL-STD-810F airborne and ground environmental compliance and high reliability.
It is ideal for radar installations, EO sensor suites, persistent wide area surveillance, and signal intelligence applications.
The MILTECH 402 is a rugged, military-grade Fast Ethernet switch with PoE and 5VDC power distribution available over the Ethernet ports. Combining LAN and power distribution and weighing less than 10 ounces, it drastically lightens the load and reduces cabling complexity in soldier carry applications.
Once connected to a military-grade 10-16.8VDC smart battery supply (4 cell Li-ION), it uses dynamic power allocation to provision 2 LAN channels with PoE (15.4 watt each), 2 LAN channels with 16.8 Vdc/5A (Vbat) and1 LAN channel with 5V/1.5A up to a maximum power budget of 35W. The MILTECH 402 is IEEE 802.3 compliant.
Networking features include full wire-speed forwarding rate (26.8 Mpps), store-and-forward, Auto MDX-II/MDI-X, auto negotiation, and address look-up.
The MILTECH 402 weighs less than 10 ounces including connectors and hardware and measures 3.93” x 3.7” x 1.34”. It meets MIL-STD 810F/G/GM, and MIL-STD 461 specifications.
Techaya’s MILTECH™ 16SER is a MIL-STD rugged, military-grade Serial over USB unit, offering 16 Serial ports over USB. The Portable Rugged Serial unit was developed specifically for the new cyber threats available in today’s networks, providing new security features and capabilities for protecting critical systems. Developed for portable military and harsh environment applications, the MILTECH 16SER features mechanical packaging enhancements designed for MIL-STD-810F airborne and ground environmental compliance and high reliability. The unit has been especially hardened to improve ingress, impact, and shock/vibration protection, as well as eliminate all moving parts through passive cooling. Interface through sealed MIL-STD circular connectors, with a 24VDC power makes it instantly compatible with network device and power systems. Compact in size, the MILTECH 16SER is particularly useful for expanding Serial port density in space-constrained airborne and ground vehicle environments while providing new security layer for serial interfaces.
The MILTECH 907 is a MIL-STD, fully managed military grade network switch designed for environments such as aerial pods, UAVs, small ground vehicles and robotics where space is extremely limited. It has 5 triple-speed(10/100/1000Mbps) ports delivered through a single top-mount, high density D-Type 44 pin connector.
Advanced network features include switching protocols, virtual LANS (VLANS), traffic prioritization (QoS), and bandwidth aggregation. It can be remotely managed to optimize communications and prioritize critical information traffic.
The unit has been especially hardened to improve ingress, impact, and shock/vibration protection and meets MIL-STD-461E and MIL-STD-810 810 F/GM , MIL-STD-1275/704 standards. Voltage input is 24Vdc and it consumes a maximum of 5W of power.
The MILTECH 9136 is a fully managed Ethernet switch that is designed to manage complex network traffic in airborne and other military applications. It has the capability to interface with a total of 52 networked devices using a combination of 24 triple-speed (10/100/1000Mbps) ports+ 8 1G fiber ports (SGMII)+ 4 10G fiber ports (SFI) + 4 QSGMII ports that can be broken out for an addition 16 ports of 1G fiber.
The MT 9136 supports both Synchronous Ethernet (SyncE) and IEEE 1588 standards for time and frequency alignment across devices on military networks. Advanced L2/L3 network features include static routing, VLANS, traffic prioritization (QoS), bandwidth aggregation, and security at both port and board level.
Conformally coated and with board-to-board connectors, it can be easily integrated as a module-based network building block in to airborne and military applications. It is rated to withstand temperatures of 40°C to +85°C and meets MIL-STD 810 and 461 when housed in an appropriate enclosure.
The MILTECH 914 is a cost-effective, ultra-compact Ethernet switch on board (ESOB) that is ideal for integrating in to system-level solutions for military and rugged applications. This 14 port (10/100/1000) managed switch includes advanced L2+ networking features such as include static routing, VLANS, traffic prioritization (QoS), bandwidth aggregation, and security at both port and board level.
At just 125mm (L) x 95(W) x 20(H), including connectors & hardware, the MILTECH 914 is the industry’s most dense Ethernet switch available. With a conformal coating, the MILTECH 914 stands up to extreme vibration and environmental elements while rated to work in temperatures from -45°C to +75°C. It complies to MILSTD-810F/G/GM when housed in an appropriate enclosure. With next-generation flat cable connectors that lock and screw down and 6-19VDC power, the MILTECH 914 easily mates with other board-level compute platforms and power systems.
The MILTECH 9022 is a MIL-STD Fully managed Military-grade network switch router with 12 triple speed (10/100/1000) ports. It is compatible with all the newest military industry network protocols for redundant link topology, security, multicast and management requirements including virtual LANS (VLANS), traffic prioritization/QoS, IPv4/IPv6 support, and bandwidth aggregation.
With a 1U footprint, the MILTECH 9022 supports 24VDC power with an optional redundant power supply for optimal system survivability. It meets MIL-STD-810F, MIL-STD-461E, MIL-STD-1275B airborne, ground mobile environmental, EMI/RFI compliance for high reliability.
The MILTECH 303 is a USB 3.1 compatible USB hub that has five (5) USB 3.1 ports, one (1) gigabit Ethernet port, and a dedicated IO port. What make this product really unique is that it not only provides connectivity between USB 3.0 devices (such as portable handhelds, sensors, storage, human interface devices, night vision goggles and GPS), but it also provides a robust power management and charging tool for these devices.
The MILTECH 303 is perfect for soldier-carry, fixed wing / rotor aircraft and rugged commercial applications. A wide voltage range of 12-28VDC and up to 2A of downstream power for each port, let’s if fit seamlessly in to a wide variety of platforms with varying power sources and still provide a consistent power to devices that require 5VDC via a USB interface. It supports the four most popular battery charging profiles: Dedicated Charging Port (DCP), Downstream Port (CDP), Standard Downstream Port (SDP) and custom profiles via SMBus or OT.
All of this technology in a rugged MIL-STD packaging that is smaller than a credit card and weighs less than 5 ounces!
The rugged MILTECH 8P mounted inside ground combat vehicles, can charge up to 8 USB based electronic devices simultaneously while providing 5Vdc, 2A per port.
The MILTECH 8P is a Rugged USB Charger, enables to charge up to eight Smart Phones, PDA devices and other hand-held military and civil devices in APV’s, APC’s and other armored combat vehicles. Due to the increase in use of USB based electronic devices such as Smart Phones, Tablets, PDA’s in the modern battlefield, there is a constant need to charge these devices while transporting, in ground combat vehicles, to the battlefield. Thus, saving valuable battery charging capabilities to be used once the soldier dismounts from the vehicle.
The MILTECH 300 HoB is a USB 3.1 compatible USB hub on board (HoB) that has five (5) USB 3.1 ports, one (1) gigabit Ethernet port, and a dedicated IO port. This unique board-level solution is perfect for space-constrained or chassis-based environments. It provides connectivity between USB 3.0 devices while delivering robust power management and charging functions. The internal Ethernet interface allows communication with upstream devices over a standard Ethernet network, further extending the flexibility of the hub and attached USB devices.
The MILTECH 303 is perfect for fixed wing / rotor aircraft, hardened portable enclosures and rugged commercial applications. A wide voltage range of 12-28VDC and up to 2A of downstream power for each port, let’s if fit seamlessly in to a wide variety of platforms with varying power sources and still provide a consistent power to devices that require 5VDC via a USB interface. It supports the four most popular battery charging profiles: Dedicated Charging Port (DCP), Downstream Port (CDP), Standard Downstream Port (SDP) and custom profiles via SMBus or OT.
The rugged MILTECH 300 HoB is conformally coated to stand up against debris and vibration and meets MIL-STD-810F standards when installed in an appropriate enclosure.